Let me know when you are ready to start :-)
Printable View
Let me know when you are ready to start :-)
Master has given me the go. Please continue at will. :)Quote:
Originally Posted by happycrops
Master's tehya
hacksaw, sandpaper and a drill? What in the name of all that is holy would you do with those??Quote:
Originally Posted by happycrops
You know, I was wondering the same thing myself. What's up with that?? :eek:
Barton.
*giggles* It is a list of items needed to create devices for nipple training... although i have not received all the information yet, i will assume the syringes go over the nipples and when you pull back on the plunger it will draw ones nipple in.
Now i have discovered the secret use of a snake bite kit. The type with the rubber suction tubes... one can place them over the nipples or clit and create a wonderful pull on them... since beginning use of it, my nipples have increased in sensitivity, which has led to them staying erect more often.
Master's tehya
LOL!Quote:
Originally Posted by fetish101
Yeah, i was kinda wondering the same thing, come on happycrops, spit it out, we wait with bated breath...
sl
*giggles* i think he likes to make us wait lucy!!! i am about to go for it on my own and see what i can come up with! Perhaps we could join forces and create our own devices!Quote:
Originally Posted by slavelucy
Master's tehya
If you do not mind, please keep us posted. This is an interesting idea and I must say that I am curious about it as a possible idea for my slave.
Barton.
Sorry Im having trouble posting I keep getting logged out
have not been able to post
if this goes up
further instructions will follow
hp
Look at african ear lobes and lips
Body modification is a matter of patience and will!!
Tell me because I will expect feedback and results :)
what guide?Quote:
Originally Posted by happycrops
Sir, all due respect, you haven't GIVEN us anything to feed back/ comment on yet except a hardware store list!!!!
Is something like the suction devices at stockroom. For example:
http://stockroom.com/b093plus.htm
I'd recommend these as a better way to go, as you can pump up to whatever level of suction you desire, and then simply detach the cylinder from the pump while you do the other nipple, or other body part.
They keep their suction very well, and you can go as hard as you can stand.
But the gauge conversion chart has been stretched too large in photoshop, or something similar. The "dots" are no longer actually the correct gauges.
For those who aren't into piercing, here's the household conversion list:
16ga thumbtack tip, big safety pin.
14ga metal coat hanger, bike spoke, wire from triangular business clamp.
12ga wire hanger, spaghetti.
10ga round toothpick, q-tip shaft, small bamboo skewer.
8 fire extinguisher pin, #5 crochet hook, small pilot lock, coffee swizzles, ink cartridge.
6ga juice box straw, lightsaber handles from Star Wars lego sets, lightbrite peg, mini-glowstick, Rold Gold pretzel stick, heroin-style medical tubing, round boot lace, lollipop stick.
4ga pilot stylus, large bamboo skewer, chopstick.
2ga drinking straw, power cord for N64, Bic automatic pencil, crayola colored pencil, yellow pipette tip, crossbow bolt, no.2 pencil.
0ga Bic round stic, candy cane, round chopsticks, Master Lock shackle, PCR tube, blue pipette tip, plastic clothes hanger.
00ga Bic round stic cap, 1/4" male headphone jack, lego person's head, fat crayons, American lock company #5200 shackle, beaded Christmas garland, Papermate Gel Roller pen.
000ga Sharpie marker body, wooden spoon handle, 1/4" female headphone jack, A/V adaptor plug head from Sony Playstation.
0000ga Sharpie marker cap, mini one-use hydrating shampoo/conditioner bottle, Eppendorf reaction vial
You know Belle, after reading your post, I was only imagining what fun you had figuring out all those everyday size conversions... ;)
I've been an active member of bmezine.com for 4 or 5 years. I figured it was easier to repost the chart of household stuff for people to get an idea of how big/ little some gauges were, than the millimeter to gauge chart. None of my piercings are over 8 gauge.
Much as your ideas are welcomed, it would be greatly appreciated if you could get on and actually add them to this thread. Many members are, it seems, very interested in what you've got to say, so please just go right ahead and say it.
You mention that you are having problems posting, which based on your three consecutive posts on the 30th, seem to have cleared up, if however you continue to have problems feel free to PM me for assistance.
Looking forward to hearing your ideas. :)
sl
Yes, we are all still waiting for more info. Please do get on with it.
Barton
Well, I have decided to figure it out for myself. Have been shopping for the necessary items, and think I can come up with a plan of my own.. LOL. Should be an interesting experiment!
I'll let everyone now how it turns out.
Master's tehya
Be safe.
Barton.
I did it!!!!! Ok all that is interested, get your drawing boards out. This is so simple to do!!!
First try going to your local pharmacy and asking them for medicine syringes. They will usually give them to you for free. Mine did anyway.
Next with a small saw, or even a steak knife, cut the end off so that you have a large opening. Use fine sand paper, or what I used was an emory board, and smooth all the rough egdes down.
I experimented a bit next to see how strong the pull was on the nipple and which end of the syringe to put against my skin. I found that if i reversed the way the plunger went in, and put the uncut side of the syringe against my skin that it had a better seal. Then i pulled my nipple up inside it... wow!!!
It worked great.
The next step is to drill some holes into the plunger neck.., place them all along the neck, for different degrees of pull or suction. Do use the smallest drill bit you can find but you will need to probably re-drill the holes a little, to open them up some more...
Now instead of using metal rods, I used tooth picks to put in the holes..This holds the plunger neck in its place and ta da..... you are finished.
I was going to send pictures tonight, but of course the batteries for the camera need to be recharged. I will also ask Canopus if it would be okay to post a demo picture... *wink wink*
Well I must say I am very pleased with the outcome. I was pricing nipple pumps and suction tubes online and it would have cost about $40-$50. These cost me absolutely nothing. I had everything I needed except the syringes, and the drugist gave those to me.
Hope I have explained this well enough. If not hopefully the pictures should help out... or just send me your questions. I will be glad to help if I can.
Have fun!!! I did!!!!!
Master's tehya
Barton, Sir:Quote:
Originally Posted by Barton
I was careful, and boy did they turn out great! I recommend them to any and all!!! Thank you for your concern!
Master's tehya
Hey, good on ya tehya!! You have so much enthusiasm and are so resourceful...*looks all impressed*.
And...you used a drill!! Submissive sisters really are doin' it for themselves! :D
Thanks for sharing it, and btw, you explained it really well.
lucy x
Thanks Luce! But it seemed as though we would be waiting forever otherwise. So a girl has to do what a girl has to do! I finally got some alone time, and just did it up... now I wished I would have made three... *wink wink*Quote:
Originally Posted by slavelucy
And hey, I didn't even drill any holes in my fingers! LOL
Anyway, thanks for the constant praise!!!! It always gives me inspiration to keep trying. Your the bestest in my book!
Hugs and kisses,
Master's tehya
Okay, i am going to have to try that!
I've been using weighted clothespins on my nipples to elongate and stretch them, and i would have considered piercing but my hubby is vanilla and hates the idea, so that idea went out the window. Plus the healing time's so long...
I am a fanfic writer, so I spend a lot of time in front of my computer. I have two hooks set into the desk in front of my monitor, and I tie my nipple clothespins to them while I'm writing to stretch them. This new technique will give me a different way to do that, and...hmm...I could even use it to enlarge my clit, which I've always wanted to do. I've been using a heavy steel clamping pipe wrench to clamp down on my clit to drag it down and out of its hood...must try your way. Thank you much!
Double Wow Jaeangel!!!Quote:
Originally Posted by jaeangel
A pipe wrench... well I would have never thought of that! *giggles*
Well I hope this works as well for you as it does for me. Besides I just love making things. I have also tried the pull top caps from water bottles. You have to be sure it is one that is deep enough... then if you have large enough breast like I do, you can suck on it until it is pulling hard on the nipple... then push the plug downand the seal will stay. But i must admit I like the new device much better.
Have fun and stay safe. Just try a little suction at first and see how they go. Then increase at your leisure.
Thanks!!
Master's tehya
Well here it is... I hope that you can get an idea of how I made this device and how much Master and I thoroughly enjoy using them.
Master's tehya
'Well here it is... I hope that you can get an idea of how I made this device and how much Master and I thoroughly enjoy using them. '
What a delightful photo. I am sure that you and your master will have many enjoyable sessions with the new contraption. It looks like a 5 cc syringe. You might look in a large animal supply store or catalog to find other sizes. I would recomend a 10 or 20 cc syringe judging from the size of your areola. More could be inhaled by the barrel and a greate extension could be achieved. If you used some vaseline or ky then you will have a better seal and might actually be able to suspend weights with these.
wow.. this is one area of play my wife won't allow :)
I would love to stretch her nipples, but that is something that is off limits.
This subject has always interested me, as i love suction on my nipples but not clamps. I wonder how much sensativity would increase by doing this.