I remember seeing some info on the net about the holes in paddles. I think I remember it saying that if you beveled the top of the hole it would cause welps to appear more quickly. I've got one shot at doing this so I want to do it right.
Printable View
I remember seeing some info on the net about the holes in paddles. I think I remember it saying that if you beveled the top of the hole it would cause welps to appear more quickly. I've got one shot at doing this so I want to do it right.
...and
It has less to do with the bevel than the holes themselves. The paddle will be preceded by compressed air that gathers in front of the paddle as you swing it. The air both slows the stroke and "cushions" the blow.
Holes reduce the amount (and size) of the air cushion. This can be a big deal and you can cause a lot of damage the first time you swing a paddle (type) you were familiar with that is now holed. Remember, k=mv**2. That means increased velocity causes a greater transfer of kinetic energy by an exponential amount (the velocity squared.)
Bevels may allow more air to be gathered and "forced" through the hole... so that may be why, if they're more effective...
So... as delia says, be careful. Especially the first few times you use a new implement.
I don't mean to hijack this thread, and I am sorry if this should be posted elsewhere on its own, but I am curious how one becomes well versed enough to leave a mark. It seems I don't mark easily, but I don't want permanent damage because of lack of experience. Any advice would be much appreciated, but I must say in advance that he doesn't share me. I'd much prefer him to be the one leaving the marks anyway. Thanks in advance!